Has there been any update on MicMacFEA (to work with V6.11) and MicMacBeam (for the Java post-processor)?

January 24, 2012 by Naresh_Sharma

Posted in

Software and numerical tools

Hello, has there been any update on MicMacFEA (to work with V6.11) and MicMacBeam (for the Java post-processor)?

Thank you.

Naresh_Sharma's blog
Login to post comments

MicMac FEA correction for v11.2 SE

Submitted by Arnaud_Divialle on Tue, 01/24/2012 - 6:45pm.

Hi Naresh,

As mentionned during the presentation of MicMac FEA, there is only a small change to do in the VBA code of the tool to have it working with ABAQUS v6.11.

Here is the procedure:
- Right clic on the button "Run FEA"
- Clic "Affect a macro"
- Then "Modify"
- In the code, look for "abq6102se.bat" and change it to your version (that is "abq6112se.bat")

With this change, the appropriate file should be called and MicMac FEA should run properly.
If you have any issue, I could send my modified version of MicMac FEA.

Regards,

Arnaud.

Thanks Arnaud, That worked.

Submitted by Naresh_Sharma on Tue, 01/24/2012 - 7:10pm.

Thanks Arnaud,

That worked. Needed to change that in many places. In english version of Excel its called Assign Macro, then Edit.

best regards,
Naresh Sharma, Ph.D.

www.nashero.com

WARNING: With this change,

Submitted by Arnaud_Divialle on Tue, 01/24/2012 - 7:15pm.

WARNING:

With this change, the MicMac FEA seams to run but no output value is updated for me.

Cannot get MicMac to run Abaqus after these fixes

Submitted by Joshua_Root on Wed, 01/25/2012 - 4:35pm.

Even after trying this fix I still cannot get MicMacFEA to run Abaqus. I had a coworker help me and we tried running stuff in the command and putting the files in the actual Abaqus folder but nothing worked. Can someone please post the updated MicMacFEA? Thank you!

Josh

Results never change & Run Status never changes from "Completed"

Submitted by Joseph_Nelson on Thu, 01/26/2012 - 12:38am.

I've made the changes to the macro to specify Abaqus6.11 2 as listed above and when I click the "Run FEA" it appears to open Abaqus, however my results for FPF, LPF, buckling, and frequency never change. As well, The status always states "Completed", unlike in the presentation where Sangwook's slides show "Not yet Started" prior to pushing "Run FEA".

With HW 4 due tomorrow it would be helpful if someone could reply if they have been able to get Mic-Mac/FEA to work.

Thanks!

Joe.

-Joe-

MicMacFEA (to work with V6.11)

Submitted by Daniel_Melo on Thu, 01/26/2012 - 4:10am.

Hello All,

We are currently working on MicMacFEA for Abaqus V6.11. Whenever is ready we will let you know.

Thanks,

Daniel